Fast drying adhesive material is very wide, can be bonded to plastic, metal, glass, wood, ceramic, rubber, stone, paper and so on.

For many other glue bonding materials, such as PP, PET, PE, TPU nylon, fluorine rubber should be used special glue. If you still want to use quick-drying adhesive, you need special treating agent to do surface treatment, because these materials are inert materials, poor activity, need to enhance the activity to bond well, the treatment of these materials, 770,778,788 treatment agent, the effect will be better.

Some customers also report that the quick-drying glue is easy to turn white and fog, especially the bonding of black plastic, which greatly affects the appearance of the product. Such problems as quick-drying glue are very common, because the quick-drying glue is cured by moisture in the air. If the air is not circulated, the white fog in the curing reaction is not easy to disperse and will gather around the bonding surface. (Which glue is special adhesive PP, PET, PE, TPU nylon --loctite401-454-4860-4850).

Problem solving method:

First, be sure to use the original authentic glue, keep the period as fresh as possible.

Second, use a low-bleaching quick-drying glue, like loctite460, but it's more expensive than regular quick-drying glue,

Third, the use of quick-drying adhesive accelerator,712 to speed up the reaction of quick-drying adhesive, avoid the production of white fog,

Fourth, increase ventilation in the operation workshop, and package the glue after it is completely cured.

Note:

1. Keep the air dry and ventilated. Operate in a damp and cool environment.

2, control the amount of glue, try not to make too much glue, glue does not flow out, in the bonding surface is not visible whitening. It is beautiful and reduces the consumption, thus reducing the cost. Kill three birds with one stone.

3, choose different glues according to the different materials. This is often said true sex, can not be confused with glue.

Of course, the strength is related to the quality of the glue and the adhesive material, such as silicone, with fast drying glue is impossible to glue directly, must be treated with professional treatment agent, silicone and then use fast drying adhesive effect is very significant.

The steam and smell of quick-drying glue can be irritating, so ventilation facilities and wearing masks are necessary, and workers should not be exposed to them for long periods of time. In general, "low volatile" or "low albino" products have less pungent odor.

This phenomenon, commonly known as "whitening" or "frosting", occurs during the curing process of quick-drying glue. Bleaching usually occurs in the summer when humidity is higher. It can also cause a strong curing reaction when excessive catalyst is used. In some cases, users need to take protective measures when assembling in closed areas.

First of all, the right viscosity should be selected, and secondly, the correct sizing method should be used. For thixotropic adhesive, should grasp the external force size, can not be too strong.

Watering is the embedding of an electronic component in a container of insulating or protective material, while encapsulation is a more common term for covering, coating, or surface protection, in which components are placed as if in a capsule.

We have many different bonding strength adhesives, and can also be customized according to the needs of customers, can meet many requirements of customers.

Yes, but in most cases, the surface of polyethylene, polypropylene, Teflon is not easy to stick, so the surface needs to be processed to achieve the ideal bonding conditions.

Usually, the amount of adhesive to finish coating bonding area is appropriate. The extra glue is not only wasteful but also spills and is not easy to clean. Automatic sizing equipment can control the continuous use of adhesives on the production line. The number of drops per tube, per bottle, per liter, per pound depends on the rate at which the liquid flows.